Instruction Manual
Installation and Operation Handbook Configuration
2416 Controller 6-9
Name Description Values Meaning
SP
Setpoint configuration
nSP
Number of setpoints
2, 4, 16
Select number of setpoints available
rm.tr
Remote Tracking
OFF
Disable
trAc
Local setpoint tracks remote setpoint
m.tr
Manual Track
OFF
Disable
trAc
Local setpoint tracks PV when in manual
Pr.tr
Programmer Track
OFF
Disable
trAc
Local setpoint tracks programmer SP
rmP.U
Setpoint rate limit units
PSEc
Per second
Pmin
Per minute
PHr
Per hour
rmt
Remote setpoint configuration
nonE
Disable
SP
Remote setpoint
Loc.t
Remote setpoint + local trim
rmt.t
Remote trim + local setpoint
AL
Alarm configuration Values
The controller contains four ‘soft’ alarms, (indication only)
which are configured in this list. Once configured, they
can be attached to a physical output in module positions
1A 2A
or
3A
.
AL1
Alarm 1 Type
see Table A
Ltch
Latching
no/YES/Evnt/mAn
*
bLoc
Blocking
no/YES
AL2
Alarm 2 Type
see Table A
Ltch
Latching
no/YES/Evnt/mAn
*
bLoc
Blocking
no/YES
AL3
Alarm 3 Type
see Table A
Ltch
Latching
no/YES/Evnt/mAn
*
bLoc
Blocking
no/YES
AL4
Alarm 4 Type
see Table A
Ltch
Latching
no/YES/Evnt/mAn
*
bLoc
Blocking
(not if ‘AL4’ = ‘rAt’)
no/YES
Table A - Alarm types
Value Alarm type
OFF
No alarm
FSL
PV Full scale low
FSH
PV Full scale high
dEv
PV Deviation band
dHi
PV Deviation high
dLo
PV Deviation low
LCr
Load Current low
HCr
Load Current high
FL2
Not usable on 2416
FH2
Not usable on 2416
LOP
Working Output low
HOP
Working Output high
LSP
Working Setpoint low
HSP
Working Setpoint high
rAt
PV Rate of change
AL4 only
* Alarm Modes
‘no’ means that the alarm will be non-latching.
‘YES’ means that the alarm will be latched, with
automatic resetting. Automatic resetting means that
if a reset is actioned before the alarm has cleared,
then it will automatically reset when it clears.
‘Evnt’ means that the alarm is used to trip
an external event. If this option is selected the
front panel alarm message will not appear.
‘mAn’ means that the alarm will be latched,
and can only be reset after it has first cleared
(called ‘manual reset mode’).