Instruction Manual

Installation and Operation Handbook Configuration
2416 Controller 6-1
6 Chapter 6 CONFIGURATION
This chapter consists of six topics:
• SELECTING CONFIGURATION LEVEL
• SELECTING A CONFIGURATION PARAMETER
• LEAVING CONFIGURATION LEVEL
• CHANGING THE PASSWORDS
• NAVIGATION DIAGRAM
• CONFIGURATION PARAMETER TABLES.
In configuration level you set up the fundamental characteristics of the controller.
These are:
• The type of control (e.g. reverse or direct acting)
• The Input type and range
• The Setpoint configuration
• The Alarms configuration
• The Programmer configuration
• The Communications configuration
• The Modules 1, 2 & 3 configuration
• Calibration
• The Passwords
WARNING
Configuration is protected by a password and should only be carried out by a qualified
person, authorised to do so. Incorrect configuration could result in damage to the
process being controlled and/or personal injury. It is the responsibility of the person
commissioning the process to ensure that the configuration is correct.