Instruction Manual
Installation and Operation Handbook Load Current Monitoring and Diagnostics
2408 and 2404 Controller D-9
TO CONFIGURE LOGIC INPUT B FOR PDS (MODE 5 ONLY)
Do This This Is The Display You Should See Additional Notes
Press button
until the LB Conf
is displayed
Press
to show
id
Press
to show
Func
Press
or
to select AmPs
This identifies the
LA input as logic
and is read only
To configure the
input for the PDCTX.
The system is designed to operate in either mode 2 or mode 5 configuration only. Selecting
both simultaneously will disable the output. However, mode 1 and mode 5 can be used
together.
LB
Conf
id
LoG.i
Func
AmPs