Specification Sheet

92032_NC 1/19 NJL
*Rough-In Guide*
SVxx-XX
SteamVection Steam Head
Installation Notes:
The steam head should be installed 24 inches from the floor, and 6 inches from any corner, inside the shower only, and as far away
from the controller and shower fixtures as possible.
The steam head housing requires a 1-1/8” hole in the shower wall, and must be flush with the finished wall and sealed to the wall to
not allow vapor or water behind it. Use ½” copper fittings to attach the housing to the steam outlet. See the full steam head housing
instructions within your generator installation guide.
SPECIFICATIONS – SteamVection Steam Head
Construction…………………….…....…. Brass
Aromatherapy……………………………. Integral Reservoir
Shipping Information:
Weight…………… 1 lbs.
Length…………..…9.5 in.
Width…………..….3.5 in.
Height………………2.5 in.
PC = Polished Chrome
SC = Satin Chrome
PB = Polished Brass
SB = Satin Brass
AB = Antique Brass
COP = Polished Copper
ACOP = Antique Copper
MB = Matte Black
For any further assistance please contact
ThermaSol at 800.776.0711 or
[e-mail]
Product Specification:
The steam head shall be approximately 1.75” x 1.75” in the square version,
and a 1.75” Dia. For the round version. The steam head is made from brass
alloy and includes an aromatherapy well.
Finish Chart:
Select desired finish and replace XX with code. No-Touch
Aromatherapy steam head and control finishes.
PN = Polished Nickel
SN = Satin Nickel
BN = Black Nickel
AN = Antique Nickel
PG = Polished Gold
ORB = Oil Rubbed Bronze
WHT = White
Round Style
Square Style