Specification Sheet
92014-1600-240_NC WAM
TSD-1600-240
Superduty™ Steam Generator Package
Rough-In Guide
PRODUCT PHOTO
SPECIFICATIONS
Input Voltage……………...........…. 208-240VAC, 3-Phase
Kilowatt Rating………………………………………..30.0KW
Maximum Amperage…………………………..….79 AMPS
Water Inlet……………………..…..……….3/8” Compression
Steam Outlet………………………………….…….1.0” NPT
Drain Valve………………………………….…3/4” GHT MALE
Safety Valve……………………………………..….3/4” NPT
Electrical connection……………………………...IEC 309
Maximum Room Size (cubic Feet)………………….1600
1” union to connect to steam line
Constant steam at a constant rate - no cycling.
Can be plumbed 50 ft. from the shower without upsizing
the generator.
Superior heating elements – low watt density.
Stainless steel construction throughout.
208-240 volt plug-in power cord (6 ft.)
Split tank technology and large capacity enhances
performance and life-span.
Maximum of up to 100’ distance from Master Controller to
Generator. Cable is included.
Hardware Kit
Temp Sensor with a 50ft Lead wires is included
Installation Notes: Must be installed by licensed electrician. Install this generator according to the supplied installation guide. Follow local
plumbing and electrical codes. Unit must be accessible. Generator is factory sized: L x W x H = Cubic Feet. Choose the appropriate generator.
For every additional foot of ceiling height over 8 ft, use the next larger generator. Always round up when calculating the total cubic feet.
Product Specification Basics:
The steam generator unit dimensions shall approximately
be 18-5/8”L x 21-1/2”W x 47-1/2”H in dimension. The generator shall
be made from stainless steel and include: Smart Steam, PowerFlush,
Split Tank, and use a 100% networked digital technology. Included is
a Master Controller (not shown) that can be installed up to 100ft
from generator. Hardware and Wall Receptacle is included along with
stainless steel water connection hose.
Shipping Information:
Weight…………… 328 lbs.
Length…………..…18-5/8in.
Width…………..….21-1/2 in.
Height……………..47-1/2in.
For any further assistance please contact ThermaSol at
800.776.0711 or sales@thermasol.com
Visit www.thermasol.com for a complete product definition
Commercial Superduty™ Series Standard Equipment:
The only 100% networked digital technology in the industry (all other
systems worldwide are old style analog).
Neverdown™ option: standby backup units available
SmartSteam™ - No irritating temp fluctuations - Perfect temp
maintenance - Patented
Wall Receptacle provided: IEC 309/ IP67/480V/60Amp
Built in transport wheels
Stainless 20” braided water flex/hose inlet connector
Pre-plumbed ¾”NPT pop-safety valve.
Outside steam room 30 Minute Mechanical Timer included
New style Polished Chrome steam head provided
240V 100A
WALL RECEPTACLE
17” x 18.75”Approx