Installation Guide

Install recessed control mud-ring (provided with control) during
rough-in stage of wall preparation. Fabricate and install materials
as precise as possible, following the shape of the mud-ring.
See page 6 for detailed instructions.
4
THERMASOL.COM
I
800.776.0711
Surface Mount Installation Recessed Mount Installation
SEMR-XX and SEMR-NTS-XX
Read warnings on page 3. For illustrative purposes only. Consult with qualifi ed professional for steam room construction details. PN: 97005_NC 4/16
Data cable to
generator
Signature Series Control Installation Instructions
3 Control Installation and Data Cable Connection
Shower wall
Materials needed:
❏ Signature Series control
❏ CAN-Bus Cable
(included with generator)
❏ Silicone
❏ Other materials as required
Tools needed:
❏ 1/2” drill for surface mount
❏ Follow pre-installation instruction on
page 5 for recessed mount controls
❏ Drill motor
❏ Other tools as required
Controller
(Contemporary style shown here)
Installation instructions, warranty,
static cling warning label
Silicone Mud Ring
(RIK-SEMR-1) for SEMR-NTS-XX
installation only
2 Tools and Materials
Parts enclosed
Make a 1/2" diameter hole in the desired location.
The control should be installed 60" from the fl oor
of the shower and away from the steamhead.
Shower wall
SEC-XX, SEM-XX, SET-XX, SER-XX,
SEC-NTS-XX, SEM-NTS-XX, SET-NTS-XX, SER-NTS-XX
Data cable to
generator