Installation Guide

THERMASOL.COM

800.776.0711

Read warnings on page 3. For illustrative purposes only. Consult with qualiﬁ ed professional for steam room construction details.

PN: 97005_NC 4/16

Steamhead Installation Instructions

When ﬁ nalizing installation, install the steamhead into the

housing, making sure that the aromatherapy ﬁ ll channels

are facing upwards.

To ensure that no moisture gets behind the steamhead and

into the wall, place a generous bead of waterproof silicone

around the steamhead, using the machined groove

(located on the back of the steamhead) as a guide.

Be sure there isn’t any debris within the housing, and that

the two O-rings are in place on the steamhead.

Press the steamhead into the housing until the steamhead

is tight against the ﬁ nished wall. You may need to wipe

away any excess silicone.

Make sure aromatherapy

ﬁ ll channels face up

Place silicone around

this groove

O-rings

This edge must be ﬂ ush

with ﬁ nished wall (+/- 1/8")

Finished wall

.63"

Contemporary

.63"

Traditional

3.5" 3.5"

3.75" 3.75"

.63" .63"

Modern Regency

4 Steamhead Installation