Specification Sheet

92028-002_A 3/18
Rough-In
Guide
PP24LR-240
PowerPak Series III Commercial Steam Generator
Shipping Information:
Weight……………..120 lbs.
Length……………..…..19 in.
Width……………..18-1/8” in.
Height……………….…32 in.
PowerPak Series III Commercial Steam Generator
SPECIFICATIONS
Input Voltage………….……............208-240VAC, 3-Phase
Kilowatt Rating………………………………………24.0KW
Maximum Amperage…………………………..…....58 AMPS
Overcurrent Protection Size………..………....….70 AMPS
Water Inlet………………………….…...3/8” Compression
Steam Outlet…………………………………….……….1” NPT
Safety Valve……………………………………..….3/4” NPT
Electrical Connection………………………….....Hardwired
Room Size (Cubic Feet)………..………..……………..>1000
For any further assistance please contact ThermaSol at
800.776.0711 or sales@thermasol.com
Superior heating elements: a level of corrosion
protection far superior to copper, brass, or stainless
18-month parts and labor in-field warranty
1” NPT Steam Outlet
Can be plumbed 50 ft. from the shower without upsizing
the generator
Stainless steel/Brass wetted components
Powder Coated Steel Enclosure
Temperature sensor with 50 ft. lead wires included
Generator must be installed by a licensed electrician.
Install this generator according to the installation guide supplied. Follow all local plumbing and electrical codes. Unit must be accessible for
service and maintenance. Generator is factory sized: L x W x H = Steam Room Cubic Feet = >1000 Cu. Ft. Choose the appropriate generator.
Product Specification Basics:
The steam generator unit dimensions are approximately 19”L x 18-
1/8”W x 32”H in dimension. The generator is made from powder
coated steel / stainless steel and includes: PowerFlush, Split Tank
design, and Master controller mounted on generator unit.
PowerPak Series III
Standard Equipment:
System components come packaged together for convenient ordering
Pre-installed ¾” NPT Pop Safety Valve
Fully programmable digital control system
7-day programmability: Specific to both time and temperature and
optimized for day-to-day individual settings
Microtouch Remote start controller
PowerFlush inner tank cleaning system: automated pressurized
decalcification system helps eliminate sediment build-up
Stainless steel split-tank design adds longevity by separating the heating
function from water feed function
Constant steam at a constant rate: no irritating steam lags or bursts

Summary of content (1 pages)