Installation Sheet

81098 Page 3 of 21 REV L 10/18 NJL
Sizing Your Steam Room
Factory Sized: L x W x H = Cubic Feet
Then choose the appropriate Model. No complicated
formulas. It’s that simple. For every foot of ceiling
height over 8 ft. (always round up) use the next larger
steam unit. Wall material irrelevant.
Generator
Model
Factory Sized
Cu Ft MAX
KW
Da
y
Spa 150 150 10
Da
y
Spa 250 250 12
Da
y
Spa 400 400 16
Da
y
Spa 650 650 20
Figure 1
Various options for the ThermaSol steam bath generator location.
Important: MAXIMUM WATER PRESSURE not to exceed 70 P.S.I.
Warning: The Steam heads are HOT! Do not install Steamhead near a seat or
bench hot steam will burn you. Keep at least 12-14 inches away from hot steam
exiting the Steamhead.