Installation Sheet

81098 Page 17 of 21 REV L 10/18 NJL
4. Manual Power Off. To manually power off the generator before the selected time has expired,
press the “Control Button” once. The LED’s will go off and the steam will turn off. (Figure 10)
Note: The Day Spa TT control has a built in memory and will remember your time and temperature
setting for the next session.
Depress once to turn off.
Generator before timer expires
Figure 10
5. Diagnostic Feature. The Day Spa TT control has a unique diagnostic feature. If there is a
malfunction within the unit, it will alert you. The red 105 LED will flash if the shower area exceeds
135F, and the red 115F LED will flash if the control button becomes stuck. If any of these
diagnostics happen the unit will shut down and lock out all user interfaces. To reset the unit, power
will need to be reset at the breaker or at the steam distribution system switch. Contact a Thermasol
technician at
[phone] for further trouble shooting steps. (Figure 11)
Over Temperature Indication
Stuck Button Indication
Figure 11