Installation Guide

81098 Page 6 of 21 REV K 02/17 JWJ

Generator Installation Instructions (con’t)

Materials Needed

 Brass ball valve (for water supply shut off)

 Pipe compound

 Copper or brass fittings & nipples (sizes and quantities per instructions)

 In-line water filter (recommended)

 3/8” brass or copper union

 1/2” brass or copper union

 Wire (sizes and quantities per instructions)

 Copper tubing or pipe

 Wire cap nuts

 Flex conduit

 Silicone

 Other materials as required

Tools Needed

 Pipe wrench

 Tubing cutter

 Wire cutters or wire strippers

 Adjustable wrench

 Screwdrivers (phillips & regular)

 Solder & Flux

 1-1/16” masonry drill bit

 7/8 ” hole saw for Deluxe Steam head

 Drill motor

 Propane torch

 Other tools as required

Note: ThermaSol steam bath generators are for indoor use only. They should never be

located outside the home.

Note: ThermaSol steam bath generators are NOT designed to be used for space heating

purposes.

Warning: Please consult your physician before using. If you are pregnant,

elderly, have high blood pressure, diabetes, suffering from heart disease,

intoxicated, or not in good health, do not use this steam bath.