Installation Guide

81098 Page 3 of 21 REV K 02/17 JWJ
Sizing Your Steam Room
Factory Sized: L x W x H = Cubic Feet
Then choose the appropriate Model. No complicated
formulas. It’s that simple. For every foot of ceiling
height over 8 ft. (always round up) use the next larger
steam unit. Wall material irrelevant.
Generator
Model
Factory Sized
Cu Ft MAX
KW
Day Spa 150
150
10
Day Spa 250
250
12
Day Spa 400
400
16
Day Spa 650
650
20
Figure 1
Various options for the ThermaSol steam bath generator location.
Important: MAXIMUM WATER PRESSURE not to exceed 70 P.S.I.
Warning: The Steam heads are HOT! Do not install Steamhead near a seat or
bench hot steam will burn you. Keep at least 12-14 inches away from hot steam
exiting the Steamhead.