Specification Sheet

ManualsBrandsThermaSol ManualsShop All ThermaSolThermaSol Thermostatic Shower System with Shower Head, Hand Shower, Slide Bar, Hose, and Shower Arm

1/2 NPT FEMALE

INLET CONNECTION

1/2 NPSM MALE

OUTLET CONNECTION

Brass shower rail

W/ waterway

SPECIFICATION SHEET

15-1002-XXX

AVAILABLE FINISHES:

ORB: Oil Rubbed Bronze, PC: Polished Chrome,

PN: Polished Nickel, SN: Satin Nickel, MB: Matte Black

FINISH CARE & MAINTENANCE

Never use any harsh alkali, acid based detergents or cleaners such as soft scrub®, scrubbing bubbles® or comet® to clean.

Do not use brillo® and scotch brite® pads. These will all harm the finish. To clean, use only a damp soft cloth and wipe using a

soft cloth. Standard windex® can also be used sparingly. It is not necessary to wipe hard to remove spots. To maintain the

finish, wipe with a soft dry cloth after use. An occasional coat of pure carnauba wax without cleaners will help protect the

finish.

www.thermasol.com

92034-1002

· All brass construction

· Height adjustable swiveling cradle for hand shower

· Mounting hardware included

· 1/2” NPT female inlet

· 1/2” NPSM male outlet

· All dimensions are nominal

Summary of content (5 pages)

PAGE 1
SPECIFICATION SHEET 15-1002-XXX Brass shower rail W/ waterway · All brass construction · Height adjustable swiveling cradle for hand shower · Mounting hardware included · 1/2” NPT female inlet · 1/2” NPSM male outlet · All dimensions are nominal AVAILABLE FINISHES: ORB: Oil Rubbed Bronze, PC: Polished Chrome, PN: Polished Nickel, SN: Satin Nickel, MB: Matte Black 1/2 NPT FEMALE INLET CONNECTION 1/2 NPSM MALE OUTLET CONNECTION FINISH CARE & MAINTENANCE Never use any harsh alkali, acid based detergents o
PAGE 2
SPECIFICATION SHEET 15-1003-XXX Stainless steel handshower hose · Stainless steel hose · Solid brass 1/2” female IPS connectors · Five foot in length · Includes washers for sealing connections AVAILABLE FINISHES: ORB: Oil Rubbed Bronze, PC: Polished Chrome, PN: Polished Nickel, SN: Satin Nickel, MB: Matte Black FINISH CARE & MAINTENANCE Never use any harsh alkali, acid based detergents or cleaners such as soft scrub®, scrubbing bubbles® or comet® to clean. Do not use brillo® and scotch brite® pads.
PAGE 3
SPECIFICATION SHEET 15-1001-XXX ROUND HAND SHOWER WAND · Solid brass construction · Single function hand shower · Includes 1.6GPM flow restrictor CEC Approved · Double walled Construction to prevent scalding AVAILABLE FINISHES: ORB: Oil Rubbed Bronze, PC: Polished Chrome, PN: Polished Nickel, SN: Satin Nickel, MB: Matte Black FINISH CARE & MAINTENANCE Never use any harsh alkali, acid based detergents or cleaners such as soft scrub®, scrubbing bubbles® or comet® to clean.
PAGE 4
SPECIFICATION SHEET 15-1000-XXX ROUND WALL RAIN ARM WITH 90° ANGLE · Solid brass construction · Includes decorative brass escutcheon · 1/2 NPT ø1” 3” 16” ø2 7/16” 7/16” AVAILABLE FINISHES: ORB: Oil Rubbed Bronze, PC: Polished Chrome, PN: Polished Nickel, SN: Satin Nickel, MB: Matte Black FINISH CARE & MAINTENANCE never use any harsh alkali, acid based detergents or cleaners such as soft scrub®, scrubbing bubbles® or comet® to clean. do not use brillo® and scotch brite® pads.
PAGE 5
2.3" (56.5mm) 0.33" (8.5mm) 8” Round shower head Installation instruction Use a licensed plumber for installation Protective Cap EPDM Screen Washer 8" (200mm) Flow Restrictor 8" (200mm) Brass Joint Ball EPDM Gasket 8" (200mm) 1. Wrap Teflon tape clockwise 2. Attach shower head to shower arm and rotate clock wise by hand, then tighten with a wrench. Stainless Steel Shower Head Shower Head Installation Suggestion Only. Teflon Tape and Shower Arm are excluded in Shower Head Packing box.