Use and Care Manual
25
Initial Operation
Problems What to do
Display Window
Unit does not attempt to
ignite when water is running.
Check for reversed plumbing?
Check the water drain valve lter. (page 22)
Unit attempts to ignite but
fails.
Reset unit and try again. There may be air in the gas line.
Have a professional check the gas supply pressure.
The hot water is not the
correct temperature.
The water may be mixed in the hot water plumbing.
The actual outlet water temperature is lower than the set
temperature of the unit.
Contact the nearest Noritz agent.
Temperature
Problems What to do
Display Window
Hot water is not available
when a xture is opened.
Are the gas and water supply valves fully open?
Is the water supply cut off?
(Check for the circular pattern in the Display Window.)
Is the hot water xture sufciently open?
Is the gas being cut off by the gas meter?
(Can other gas device such as stoves be used?)
(For LP) Is there enough gas in the tank?
(Can other gas devices such a stoves by used?)
Is the water drain valve lter clogged? (page 22)
Is the power button (optional remote controller) turned on?
Check for the error code in the Display Window?
Is the error code " " ashing? (page 24)
No water is available
when a xture is opened.
Is the water supply cut off?
(Check for the circular pattern in the Display Window.)
Is the unit frozen?
The hot water at the
xture is not the correct
temperature.
Is the hot water xture sufciently open?
The actual outlet water temperature is lower than the set
temperature of the unit.
Contact the nearest Noritz agent.
Water takes time to
become hot when turning
the hot water xture.
Have you allowed enough time for the cold water in
the pipes to drain out.
or
(page 24)
=1-4, F
# =1-9,
A, b, C, d, E, F