Tip Technical Datasheet

ManualsBrandsThermaltronics ManualsHobbyM Series Type 700 30° Chisel Tip (1.0mm) (TMT-9000S)

Check for latest datasheet

M7CH178H Datasheet

Technical Specifications

700 Type Cartridge

350°C - 398°C

RoHS Compliant

/ Lead Free:

YES

For Use With: TMT-9000S-1, TMT-9000S-2, MX-500, MX-5000, MX-5200

Material Composition Patented Color Band

Thermaltronics tip cartridges will typically idle within a temperature range of +/-1.1°C. However, there is variation in idle temperature across tip geometries

within an individual temperature series. Thermaltronics offers a wide variety of tip geometries from 0.25mm fine point tip to 5mm chisel. The length and

geometry of a tip will have an influence on the tip idle temperature. To accurately measure idle temperature it will depend greatly on the measurement method,

technique and equipment used. Two different methods or the use of alternative equipment will produce different test results.

Please refer to http://www.rohs.gov.uk for details on RoHS Compliance.

M7CH178H

Chisel 30° 1.0mm (0.04"), Power

Plus

Tip Style: Chisel 30°

Tip Width: 1.00mm (0.04")

Tip Length: 11.40mm (0.45")

All components

are RoHS

compliant and

Lead-Free.

Summary of content (1 pages)

PAGE 1
Check for latest datasheet M7CH178H Datasheet Technical Specifications M7CH178H Chisel 30° 1.0mm (0.04"), Power Plus Tip Style: Chisel 30° Tip Width: 1.00mm (0.04") Tip Length: 11.40mm (0.45") 350°C - 398°C 700 Type Cartridge1 : RoHS Compliant2 / Lead Free: YES For Use With: TMT-9000S-1, TMT-9000S-2, MX-500, MX-5000, MX-5200 Material Composition Patented Color Band All components are RoHS compliant and Lead-Free. 1 Thermaltronics tip cartridges will typically idle within a temperature range of +/-1.