TMT-9000S User Manual
1
TMT-9000S Curie Heat Technology Soldering/Rework Station
USER MANUAL
TMT-9000S SPECIFICATIONS
Input Line Voltage: TMT-9000S-1 100-110 VAC, 0.6A
TMT-9000S-2 220-240 VAC, 0.35A
Tip to Ground Potential: <2mV, true RMS 50-500Hz
Tip to Ground Resistance: <2 Ohms DC
Idle temperature Stability: +/- 1.1˚C (2 ˚F)
Maximum Enclosure Temperature: 50 ˚C (122 ˚F)
Fuse: TMT-9000S-1 250V 1A
TMT-9000S-2 250V 0.5A
Output Frequency: 13.56 MHz
Size (W x H x D): 212.4mm x 118mm x 132mm
Weight: 3.47 KG
LCD display: 60mm x 16mm
Input Line Frequency: 50/60 Hz
Certication Marks: TMT-9000S-1 cTUVus
TMT-9000S-2 CE, GS
Power cord not incuded, please use 3-Wire Grounded, 6 feet (1.8 Meter), 10A.
Please disconnect the power cord from the unit before performing maintenance.
INTRODUCTION
Congratulations on your purchase of the TMT-9000S soldering/rework
station. This unit has been tested and inspected by Thermaltronics prior
to shipment, and with proper maintenance will give you years of reliable
performance.
Soldering Station Components:
TMT-9000PS Power Supply
SHH-1 Soldering Handpiece Holder
SHP-1 Soldering Handpiece
RMP-1 Tip Removal Pad
SG-1-GR Soldering handpiece grip Green
SG-1-GY Soldering handpiece grip Grey
BC-1 Brass Curls
SPG-1 Sulphide Free Sponge
M7CH176 Soldering tip cartridge