USER MANUAL TMT-9000S CURIE HEAT TECHNOLOGY SOLDERING/REWORK STATION www.thermaltronics.
TABLE OF CONTENTS TMT-9000S SPECIFICATIONS..................................................................... 1 INTRODUCTION........................................................................................... 1 SYSTEM FEATURES.................................................................................... 2 HANDPIECE FEATURES.............................................................................. 3 WORKSTAND FEATURES.........................................................................
USER MANUAL TMT-9000S SPECIFICATIONS Input Line Voltage: TMT-9000S-1 TMT-9000S-2 Tip to Ground Potential: Tip to Ground Resistance: Idle temperature Stability: Maximum Enclosure Temperature: Fuse: TMT-9000S-1 TMT-9000S-2 Output Frequency: Size (W x H x D): Weight: LCD display: Input Line Frequency: Certification Marks: TMT-9000S-1 TMT-9000S-2 100-110 VAC, 0.6A 220-240 VAC, 0.35A <2mV, true RMS 50-500Hz <2 Ohms DC +/- 1.1˚C (2 ˚F) 50 ˚C (122 ˚F) 250V 1A 250V 0.5A 13.56 MHz 212.4mm x 118mm x 132mm 3.
SYSTEM FEATURES Power Supply: The TMT-9000S power supply is manufactured from the finest materials and is the most compact 13.56MHz power supply available on the market today.
USER MANUAL HANDPIECE FEATURES The unique SHP-1 hand piece is comfortable to use, light weight and well balanced. The clever handle design incorporates an aluminium front section, with either grey or green grips and an ESD safe, nylon rear which minimises heat transfer and ensures operator comfort. Complete Handpiece assembly including cartridge removal pad. To change grip, unscrew the front retaining cap and slide off the old grip. Insert new grip and retighten front cap.
UNPACKING/ASSEMBLY/OPERATION Please read this manual and follow the directions before using the equipment. The carton contains: 1. Instruction manual 2. TMT-9000PS power supply 3. SHH-1 Soldering handpiece holder, including Brass curls and sponge 4. SHP-1 Soldering handpiece, with green and grey grips 5. RMP-1 Tip removal pad 6. M7CH176 Soldering Cartridge Important: Keep all shipping materials until satisfactory operation has been verified. Assembly and Operation 1.
USER MANUAL TIP CARTRIDGE REPLACEMENT/CARE Tip Cartridge Replacement Thermaltronics tip cartridges are very easy to install and remove; make sure that you turn off the power supply first. A simple “pull action” will disengage the tip from its connector. When reinserting a new tip, the cleverly designed inner shaft of the handpiece will self centre the tip in order to ensure quick and easy assembly. A tip removal pad is included and should be used when inserting or removing hot tips from the handpiece.
ORDERING GUIDE TMT-9000S CURIE HEAT TECHNOLOGY SOLDERING SYSTEM THERMALTRONICS 100-110V SYSTEM PART NUMBER TMT-9000S-1 POWER SUPPLY TMT-9000PS-1 HANDPIECE SHP-1 WORKSTAND SHH-1 TIP CARTRIDGE M7CH176 THERMALTRONICS 220-240V SYSTEM PART NUMBER TMT-9000S-2 POWER SUPPLY TMT-9000PS-2 HANDPIECE SHP-1 WORKSTAND SHH-1 TIP CARTRIDGE M7CH176 www.thermaltronics.com support email: support@thermaltronics.
