VD5000BNA User's Manual Benutzerhandbuch Mode d’emploi Manual del usuario Manuale dell’utente 安裝說明書 用戶手冊 ユーザーズマニュアル Руководство пользователя C 2007 Thermaltake Technology Co., Ltd. All Rights Reserved. 2007.06 All other registered trademarks belong to their respective companies. www.thermaltake.
English English TM VD5000BNA User's Manual
English English Chapter 1. Product Introduction Specification ontents Chapter 1. Product Introduction 1-1 Specification 02 Chapter 2. Case Mechanical Operation 2-1 Wheel installation 03 2-2 Upper flap installation 04 2-3 Lower visor installation 04 Case Type Super Tower How to open the panel 05 Dimension (H*W*D) A.Side panel 05 650 x 240 x 770 mm 25.6 x 9.4 x 30.3 inch B.Rear panel 05 Material Aluminum Extrusion C.Top panel 06 Color Black 2-5 5.
English English 2-2 Upper flap installation Chapter 2. Case Mechanical Operation 2-1 Wheel installation 1 1 To attach the upper flap, please align the visor flap with the hinge tabs on top of the SwordM case. These holes are for attaching case wheels. 2 3 Slide the hinge bar through the visor. 2 3 Please align the 4 holes from the wheel to these four holes on the case and screw in the wheel with the provided screws.
English English 2-4 How to open the panel A.Side panel 1 Remove the two screws, the upper and lower screws on the right side, side panel. 2 3 The rear panel should swing open. C.Top panel 3 2 Holding the left side, side panel, remove the upper and lower screws. 1 Caution, the Hydraulic lift will open automatically once the screws are removed. 2 1 2 1 2 Pull both sides of latch and turn clockwise. B.Rear panel 3 1 4 Pull the latch as shown. Lift top panel.
English English 2-5 5.
English English 2-7 How to install the Power Supply 2-9 7" LCD monitor installation (Optional) 1 2 1 2 1 Unscrew screws shown at the top edge of the case and remove the power supply cage. 2 Slide the power supply into the power supply cage. 1 4 3 Place power supply cage back into position as shown. Place power supply cage with power supply as shown and screw in to secure. 2 3 4 5 2-8 PCI slot usage 2 1 Pull the latch on the PCI card holder.
English English 2-10 7" LCD monitor removal 6 8 10 11 1 2 3 4 6 7 8 9 7 9 11 12
English English Chapter.3 Motherboard & Leads Installation 3-1 Motherboard Installation 3-2 Case LED connections Each motherboard has different standoff layout. It is highly suggested that you refer to your motherboard's manual when installing motherboard into the Case. The cases are applicable with Standard ATX, Micro ATX motherboards. Your motherboard may require a special I/O Panel, which should be included with your motherboard.
English English 3-3 USB2.0 & IEEE1394 Firewire connection USB connection Please consult your motherboard manual to find out the section of "USB connection". USB2.0 (Brank) GND1 3-4 Audio connection Please refer to the following illustration of Audio connector and your motherboard user manual. Please select the motherboard which used AC'97 or HD Audio (Azalia), (be aware of that your audio supports AC'97 or HD Audio (Azalia)) or it will damage your device(s).
English English 3-5 Connexion eSATA TM VD5000BNA Connect this to your motherboard at the HDD LED arrow means "+" Connect this to your power supply unit. Connect this to your motherboard at SATA.
