User`s manual

English English
29
30
4-3 Install watertube
Unscrew the nut on waterblock.
Insert a tube through the
nut of waterblock. Tighten
the nut on the waterblock.
Insert the hose clip and the
hose connector through the
tube from the waterblock.
Use pliers to tighten the hose clips.
Repeat the steps for the other side.
Unscrew the nut of pump and insert
a new tube through the nut of pump.
Then tighten it.
Unscrew the nut of waterblock and
insert the tube from pump through
the nut of pump. Then tighten it.
Connect the 4-pin connector of pump
to power supply.
Unscrew the nut of tank and insert
the tube from radiator through the
nut of pump. Then tighten it.
Copper
waterblock
Radiator
Liquid
tank
Pump