User`s manual

English English
25
26
1.Insert the screws (D) through the Clip(ABC)
into the two holes on the Motherboard.
2.Put the washers (F) along the screws to
prevent the electric current.
3.Put the stand offs (I) along the screws to
fix the screws on the motherboard.
4.Apply a thin layer of thermal compound(G)
onto the processor.
5.Place waterblock on the processor through
the screws and fix it by thumb nuts(E).
E
A
I
F
B
C
A
D
G
Combine the Insulator(C) and the cushion (B)
using the adhesive. Stick the metal H-type clip(A)
with the insulators (BC). Tear off the protective
layer to adhere it onto the motherboard.
Attach H-type clips(including ABC) on the back
side of motherboard.
Install Waterblock on Motherboard
Exploded View
Completed View
4-2-4 Secure Waterblock onto CPU (AMD Socket AM2)
A. Install by back plate for motherboard
(Standard installation)
AMD AM2
Motherboard
Components for
AMD AM2:
G-Thermal compound
H-38mm screws
H
G
Remove the
retention frame
from motherboard.
1.Apply a thin layer of thermal
compound(G) onto the processor.
2.Place waterblock on the processor.
3.Secure the waterblock on the
motherboard by using screws(H).
Check Your Back Plate!
A. If the back plate does have threaded
stand offs, please continue with
standard installation.(4-2-4 A)
B. If the back plate does NOT have threaded
stand offs, please continue with 4-2-4 B.
Install the Clip on Motherboard
Install Waterblock on Motherboard
Exploded View
Completed View
H
G