VD500LBNA User's Manual Benutzerhandbuch Mode d’emploi Manual del usuario Manuale dell’utente 安裝說明書 用戶手冊 ユーザーズマニュアル Руководство пользователя C 2007 Thermaltake Technology Co., Ltd. All Rights Reserved. 2007.05 All other registered trademarks belong to their respective companies. www.thermaltake.
English English TM VD500LBNA User's Manual
English English Chapter 1. Product Introduction ontents Specification Chapter 1. Product Introduction 1-1 Specification 02 Chapter 2. Case Mechanical Operation 2-1 Wheel installation 03 2-2 Upper flap installation 04 2-3 Lower visor installation 04 2-4 How to open the panel 05 Model A.Side panel 05 Case Type Super Tower B.Rear panel 05 Dimension (H*W*D) C.Top panel 06 650 x 240 x 770 mm 25.6 x 9.4 x 30.3 inch 2-5 5.
English English 2-2 Upper flap installation Chapter 2. Case Mechanical Operation 2-1 Wheel installation 1 1 To attach the upper flap, please align the visor flap with the hinge tabs on top of the SwordM case. These holes are for attaching case wheels. 2 3 Slide the hinge bar through the visor. 2 3 2-3 Lower visor installation Please align the 4 holes from the wheel to these four holes on the case and screw in the wheel with the provided screws.
English English 2-4 How to open the panel A.Side panel 1 Remove the two screws, the upper and lower screws on the right side, side panel. 2 3 The rear panel should swing open. C.Top panel 3 2 Holding the left side, side panel, remove the upper and lower screws. 1 Caution, the Hydraulic lift will open automatically once the screws are removed. 2 1 2 1 2 Pull both sides of latch and turn clockwise. B.Rear panel 3 1 4 Pull the latch as shown. Lift top panel.
English English 2-5 5.
English English 2-7 How to install the Power Supply 2-9 7" LCD monitor installation (Optional) 1 2 1 2 1 Unscrew screws shown at the top edge of the case and remove the power supply cage. 2 Slide the power supply into the power supply cage. 1 4 3 Place power supply cage back into position as shown. Place power supply cage with power supply as shown and screw in to secure. 2 3 4 5 2-8 PCI slot usage 2 1 Pull the latch on the PCI card holder.
English English 2-10 7" LCD monitor removal 6 8 10 11 1 2 3 4 6 7 8 9 7 9 11 12
English English Chapter.3 Motherboard & Leads Installation 3-1 Motherboard Installation 3-2 Case LED connections Each motherboard has different standoff layout. It is highly suggested that you refer to your motherboard's manual when installing motherboard into the Case. The cases are applicable with Standard ATX, Micro ATX motherboards. Your motherboard may require a special I/O Panel, which should be included with your motherboard.
English English 3-3 USB2.0 & IEEE1394 Firewire connection USB connection Please consult your motherboard manual to find out the section of "USB connection". USB2.0 (Brank) GND1 3-4 Audio connection Please refer to the following illustration of Audio connector and your motherboard user manual. Please select the motherboard which used AC'97 or HD Audio (Azalia), (be aware of that your audio supports AC'97 or HD Audio (Azalia)) or it will damage your device(s).
English English Chapter 4. Liquid Cooling Installation 3-5 Connexion eSATA 4-1 Installation steps Components check Connect this to your motherboard at the HDD LED arrow means "+" Install Waterblock 4-2-1 4-2-2 4-2-3 4-2-4 Connect this to your P19 Intel LGA 775 Intel P4 478 AMD K8 AMD AM2 Install Water tube P29 Fill Coolant P31 power supply unit. Complete installation Connect this to your motherboard at SATA.
English English 4-2 Install waterblock 4-2-1 Secure Waterblock onto CPU (Intel LGA 775) Install the Clip on Motherboard Install Waterblock on Motherboard Intel LGA 775 Motherboard Tear off the tape on the back of the Insulator (C) and place it on the metal H-type clip(A).
English English 4-2-2 Secure Waterblock onto CPU (Intel P4 Socket 478) Install the Clip on Motherboard Install Waterblock on Motherboard Intel P4 Socket 478 Motherboard Tear off the tape on the back of the Insulator (C) and place it on the metal H-type clip(A).
English English 4-2-3 Secure Waterblock onto CPU (AMD K8 Socket 754 / 939 / 940) A. Install by back plate for motherboard (Standard installation) Install the Clip on Motherboard G Install the Clip on Motherboard Components for AMD K8: G-Thermal compound H-38mm screws Remove the retention frame from motherboard. C B A AMD K8 Motherboard H B. Install by clips bundled in package D E F G I AMD K8 Motherboard Check Your Back Plate! A.
English English 4-2-4 Secure Waterblock onto CPU (AMD Socket AM2) A. Install by back plate for motherboard (Standard installation) Combine the Insulator(C) and the cushion (B) using the adhesive. Stick the metal H-type clip(A) with the insulators (BC). Tear off the protective layer to adhere it onto the motherboard. Attach H-type clips(including ABC) on the back side of motherboard.
English English B. Install by clips bundled in package Combine the Insulator(C) and the cushion (B) using the adhesive. Stick the metal H-type clip(A) with the insulators (BC). Tear off the protective layer to adhere it onto the motherboard. Install the Clip on Motherboard C B A E D AMD AM2 Motherboard Remove the retention module from the motherboard.
English English 4-3 Install watertube Copper waterblock Use pliers to tighten the hose clips. Repeat the steps for the other side. Pump Liquid tank Radiator Unscrew the nut on waterblock. 29 Unscrew the nut of tank and insert the tube from radiator through the nut of pump. Then tighten it. Insert a tube through the nut of waterblock. Tighten the nut on the waterblock. Unscrew the nut of pump and insert a new tube through the nut of pump. Then tighten it.
English English 4-4 Fill Coolant Open the cover of liquid tank and fill the tank up with coolant. Turn on the PC power switch. Note: 1. If bubbles are forming within the tubing, you may tap the tubing gently to remove them until all are gone. 2. After installation is completed, please ensure there are no bent tubings. Liquid level will decrease when you power on the system, please keep filling coolant until the tank is filled up.
English English 4-5 Schedule Maintenance Performing scheduled check up for the liquid cooling system will ensure optimal cooling performance! Pump Fan Assembly Make sure fan is operating properly without abnormal noise. Ensure pump is working proper. Tubing Water Tank Tubing within the system must not be bent. Replace tubing if necessary. Check for water level within the water tank. If the liquid level is below the low level, please follow the installation steps on manual to refill the coolant.
