manual

O4468
REVISION A.2007.05
Please visit our Support Section for more technical support or update at
Components >>
Flow TX Plus
LCD Monitor
Velcro X 1
Install the LCD monitor >>
Install the tube with the Quick Install Connectors >>
>
Unscrew the nut
Insert the tube through the nut and tighten
it on the Flow TX Plus. Repeat the
installation steps for the other side.
NOTE: Before installing, please make sure that the connectors on Flow TX Plus are tightened properly.
>
Tear off one side of the
velcro and stick it on
the down side of
LCD monitor
Tear off the other side of the velcro and
stick it in a proper location inside the chassis
>
Connect the 2 pin
temperature sensor
from LCD monitor to
Flow TX Plus
Connect the 4-pin
power connector from
LCD monitor to
power supply.
>
Flow TX Plus
P/N : CL-W0138
Flow meter with Water Temperature Indicator