Datasheet

1
8
1
7
Installation
Fan Control Wire X 4
Controller connection figure
Application:
Each set of Fan Control Cable is labeled as followed:
Fan1/Fan2/Fan3/Fan4
Each can be connected to 3pin fan connector.
Fan1
Fan2
Fan4
Fan3
2.2 Fan Connectors
2.3 How to install the connectors
2.3.1 Fan connector with RPM signal wire
( 1 ) With 3 pin connector
Example:
Red
+12V
Black
Ground
Yellow
Signal RPM
With 3 pin connector
Some fan unit may be using +12V +5V 4pin connector.
In order for Hardcano 12 module to control, you'll need to utilize this
included adaptor.
CPU Fan
Adaptor(3 pin to 4 pin)
Installation
Connecting Fans
Above application shows Fan1 Fan Control Cable connected to the most
common fan connector. This setup will allow Hardcano 12 to adjust fan
speed and receive RPM signal as well.(please refer Q&A Q5 )
( 2 ) With 4 pin connector and RPM signal wire
4 pin connector
PCB Fan Connector
Fan Monitor Connector
Fan1 Fan2 Fan3 Fan4
Fan4
Fan3
Fan2
Fan1