Datasheet

-8-
Step 3. Connect ‘Mainboard Power Switch Cable’ to the
‘Power Switch’ Connector on the mainboard from ‘CN2
connector’ on the iMON 2.4G DT receiver.
Step 4. Connect ‘Internal or External USB cable’ to
the ‘mainboard internal USB connector’ or ‘external
USB connector’ and ‘CN4 connector’ on the iMON
2.4G DT receiver.
CN1 connector is reserved for the future use. You don’t need to connect any cable to this CN1
connector.
iMON 2.4G DT Installation Process
Line Color Additional USB Port Pin Name
RED VCC, POWER, USBPOWER
WHITE D-, DATA-, USBP#-, UP#-, P#-
GREEN D+, DATA+, USBP#+, UP#+, P#+