User's Manual

20140703 V1.1

least once every month.

To recharge the built-in battery:

1. Connect the Bluetooth Speaker’s “Micro USB socket (5)” with the

Computer’s USB port through USB cable.

2. The “Mode LED 2 (12)” will turn On in red, the battery is in charging.

3. The “Mode LED 2 (12)” will turn Off when the rechargeable battery is

fully charged.

4. Disconnect the USB cable when it is done.

D. Power ON and Pairing

1. Slide the “Power Switch (4)” to “ON” position to turn On the device.

2. A series of tones will sound and the “Bluetooth LED (11)” indicator is

fast blinking in Blue.

3. Then, activate the Bluetooth function in your Bluetooth device (such

as Mobile Phone or Personal Computer); the device will enter to

Bluetooth searching mode automatically, if not, tap the relate

selection to manually enter to searching mode. (refer to your device’s

manual when necessary)

4. Your Bluetooth device should show “BTS28” in list, and then select it

for pairing. Waiting for some seconds and you will see connected

message as shown on your mobile device. (For some Bluetooth

devices, you may need to input “0000” as pairing password)

5. If pairing is successful, a tones will sound and the “Bluetooth LED

(11)” indicator will slow blinking each 3 ~ 4 seconds once.

6. Now, you can start to music play from the mobile device by it music

player program.

7. Slide the “Power Switch (4)” to “OFF” position to turn Off the device

when it is not in use.

E. Disconnect from paired device

1. To disconnect with paired device and for better result, turn Off the

Bluetooth Speaker by power OFF directly.

2. Or, you can choose “Disconnect” from Bluetooth paired device list on

your mobile device.

3. In this case; the Bluetooth Speaker will turn back into “Searching /

Pairing” mode in seconds, a series of tones will sound and the

“Bluetooth LED (11)” indicator will fast blinking in Blue from slow.

4. Now, you can process for new mobile device pair or power Off the

Bluetooth Speaker as you wanted.

F. Auto reconnect with paired device

1. Every time you turn On the Bluetooth speaker power; it will firstly

searching for the mobile device, which has been paired previously