Owner manual

www.thermaltransfer.com [e-mail] 262.554.8330
69
AIR COOLED OCA
THE OCA ADVANTAGE
Advantages
T-BAR provides advantages and value far beyond typical aluminum
core designs.
Superior performance
Aluminum has up to 25 percent higher heat transfer capacity in
comparison to a traditional copper/brass cooling package.
Rugged Structure
Resistant to Fouling
Resistant to Salt Spray and Salt Air
Compact
Flexible Mounting and Port Configuration
Great Dollar Value Per BTU
LOW-CLOGGING
HIGH-PERFORMANCE
T-BAR is a flexible design,
high performing, and a cost-
effective aluminum solution.
Tubular Micro Channel Extrusion (T-BAR™)
T-BAR is manufactured with Alloy 1100 aluminum micro channel and bars
in our patented in-house tube-to-bar brazing process using a Nocolok CAB
(Controlled Atmosphere Brazing) brazing technology furnace. Because our
tubes are a solid extrusion, T-BAR is very robust — with no tube seams
to fail and leak.
WELDING STATION
8: Weld tank, ports &
BraCketry to Core
COOL-DOWN UNIT
7: Cool
FLUX STATION
4:Flux Core unit
to prepare For Brazing
STACKING STATION
3: staCk assemBle tuBe &
Bars to Form Core unit
CUTTING STATIONS
1: Cut extruded 2:Cut spaCer Bars
aluminum tuBing
FURNACE
5:pre-Heat 6: Braze
1200˚ F
T-Bar Manufacturing Process
T-BAR CORE IN OCA ASSEMBLY
• CORE INSIDE •