Manual

How to contact Alfa Laval
Contact details for all countries
are continually updated on our website.
Please visit www.alfalaval.com to
access the information directly.
ENSR00002USEN 0206 All rights reserved for changes in specifications
Working principle
Channels are formed between the plates and the corner ports
are arranged so that the two media flow through alternate
channels. The heat is transferred through the plate between
the channels, and complete counter-current flow is created
for highest possible efficiency. The corrugation of the
plates provides the passage between the plates, supports
each plate against the adjacent one and enhances
the turbulence, resulting in efficient heat transfer.
Standard materials
Frame plate
Mild steel, painted
Nozzles
Flange: Stainless steel, Titanium
Lined: Stainless steel, Titanium
Pipe: Stainless steel
Plates
Stainless steel AISI 316
Titanium (M6M only)
Gaskets
M6 Nitrile, EPDM, HeatSeal F™
M6M Nitrile, EPDM, HeatSeal F™, Viton
®
G
Connections
Pipe connections:
2" NPT
With flanges:
FG 2" SOLJ ANSI 150
FD 2" SOLJ ANSI 150/ANSI 300
Technical data
Mechanical design pressure (g)/temperature
FGL 150 psig/320ºF (non-ASME)
FG 150 psig/356ºF
FD 360 psig/356ºF
Maximum heat transfer surface
410 sq. ft.
Dimensions
Measurements (mm)
Type H W h
M6-FGL 36.22" 12.60" 5.51"
M6-FG 36.22" 12.60" 5.51"
M6-FD 37" 13" 5.91"
The number of tightening bolts may vary depending on pressure rating.
Particulars required for quotation
– Flow rates or heat load
– Temperature program
– Physical properties of liquids in question (if not water)
– Desired working pressure
– Maximum permitted pressure drop
– Available steam pressure
Flow principle of a plate heat exchanger
20" – 55"
5.51"
25.2"
THERMAL TRANSFER SYSTEMS, INC.
[e-mail]
PH: 800-527-0131 FAX: [phone]