Product Manual

Manual 0-5185
9
Re-Assembly
13.Re-attachtheworklead‘Work1’connectionandtorqueto17+/-1in/lbs.Connecttheinternalgaslterhose
previously removed. Orient transformer and Contactor wires so that they are not pinched or pressed up against
thePCBandtheinstalledenclosuretop.AlsoseeFigure15.
Figure23:WorkleadConnectionre-installedFigure24:Hosere-installed
Figure25:InstallationforCutmaster40mm
14.Re-installtheMetalCoverandsecurewiththepreviouslyremovedscrews.Installto17+/-1in/lbs.Re-tighten
cordgriponACpowercordto34+/-1in/lbs.Cordshouldnotpullfromtheunit.