Product Manual

Manual 0-5185

8. CM12,20,25&40UNITSWITHCEFILTERS:Removewires#5&#6fromthecontactorandreplacewiththe

harnessincludedwiththekit.ThiswillinvolveclippingwirestiesasinFigure16.RemoveJ6fromtheMainPCB

andreplacewiththeharnessconnection.InadditiontheCM25andCM40unitsrequirewires#7and#8tobe

replacedwithcontentsofthemodicationkit,location‘T1’&‘T2’.Usecaretoensurethatthewiresareinstalled

in the same locations.

Figure10:CONTACTORCOILHARNESS

Figure11:LOADCONTACTORWIRES7,8&9Figure12:LOADWIRES7&8REMOVED

Figure13:CEFilterUnitsONLY.Removeandreplace‘J6’Connection