Manualshelf

Product Manual

ManualsBrandsThermal Dynamics ManualsPlasma CuttersCutmaster 82 Plasma Cutter — Inverter, 230V, 55-80 Amp Output
12345678910
Manual 0-5185
3
Figure4:AirHose,TransformerandWorkleadConnections
4. RemovetheT-20Torxscrewsfromthecontactorbasebothfrontandrear.
Figure5:FrontContactorMountingScrewFigure6:RearContactorMountingScrew
5. (SKIPthisstepifunitcontainsanCEFilter)Toassistwiththecontactorremoval,itisrecommendedtoloosen/
removetheACpowercordgripfromtherearoftheCutmaster.Thiswillallowthecordtobepushed/pulled
through the Cutmaster rear panel.
Figure7:CordGripRemoval