Product Manual

Manual 0-5185
10
Figure26:CordGripScrews
End of Procedure
15.ItisadvisabletotesttheCEpowercircuittotheCutmasterTruePowerSupplyafterthisprocedureiscompleted.
Refertotheownersmanualforthespecicversionforinstruction.
Removal for Voltage Changeover
WARNING
Disconnect the Mains Power to the power supply before attempting to remove the contactor enclosure
cover!
16.Removalofthecontactorboxcoverisdonebyunlatchingtheoutboardsidethreelatchesandpressingagainst
the inboard side with a screwdriver. Completely loosen one latched side before moving to the other.
Figure27:ContactorEnclosureremoval
NOTE
Everyefforthasbeenmadetoprovidecompleteandaccurateinformationinthismanual.However,
the publisher does not assume and hereby disclaims any liability to any party for any loss or damage
causedbyerrorsoromissionsinthisManual,whethersucherrorsresultfromnegligence,accident,or
any other cause.