Installation Instructions

English 10
Installer Final Check List
F Specified clearances maintained to cabinet surfaces.
F Unit is level.
F All packaging material removed.
Electrical
F Receptacle with correct over-current protection is
provided for service cord connection.
F Proper ground connection.
F Owner is aware of location of the main circuit breaker.
Operation
F Drawer handle is level and centered. Drawer opens
and closes properly.
F
INSTALLER: Write the model number and serial
number found on the Data Rating Label in the USE
AND CARE GUIDE.
Leave the USE AND CARE GUIDE
and the INSTALLATION MANUAL with the owner of the
appliance.
How to Find the Model Number
The Data Rating Plate shows the Model and Serial
Numbers. Please provide this information when requesting
service. The data rating plate is visible on the left side of
the drawer casing.
Before Calling Service
If the warming drawer elements or indicator light do not turn
on, check the power source to see if the circuit breaker is
tripped.
See Use and Care Guide for troubleshooting information.
Refer to the Warranty in the Use and Care Guide.
To reach a service representative, see the contact
information on the back page of the manual. Whether you
write or call, please provide us with the Model Number,
Serial Number and Date of Original Purchase.
Cleaning and Protecting Exterior Surfaces
The stainless steel surfaces may be cleaned by wiping with
a damp soapy cloth, rinsing with clear water and drying
with a soft cloth to avoid water marks. Any mild glass
cleaner will remove fingerprints and smears.
For discolorations or deposits that persist, refer to the Use
and Care Guide.
To polish and protect the stainless steel, use a cleaner/
polish such as Stainless Steel Magic
®
.
DO NOT allow deposits to remain for long periods of time.
DO NOT use ordinary steel wool or steel brushes. Small
bits of steel may adhere to the surface causing rust.
DO NOT allow salt solutions, disinfectants, bleaches or
cleaning compounds to remain in contact with stainless
steel for extended periods. Many of these compounds
contain chemicals which could prove harmful. Rinse with
water after exposure and wipe dry with a clean cloth.
Figure 10: Data Rating Plate
Data plate
Data plate
Data Plate
Specifications are for planning purposes only. Refer to installation
instructions and consult your countertop supplier prior to making a counter
opening. For the most detailed information, refer to the installation
instructions accompanying this product or write THERMADOR
®
indicating
the model number.
We reserve the right to change specifications or design without notice.
Some models are certified for use in Canada. THERMADOR is not
responsible for products which are transported from the U.S. for use in
Canada. Check with your local Canadian distributor or dealer.