Installation Guide

Page 20
Make-up air damper wiring (if required)
(Refer to make-up air damper instructions.)
MAKE-UP AIR
DAMPER
CONTACTS
Connects to 2 contacts on electrical panel.
Install cooking appliance
Align the cooking appliance with downdraft and fasten appliance in
place following appliance instructions.
Note: Accurate alignment of cooking appliance and downdraft is
necessary to ensure that there is no interference when air vent is raised
and lowered. There should be a gap of 1/32" - 1/16" (0.79mm - 1.59mm)
between the back of the cooktop and the front of the downdraft cover.
Attach endcaps to downdraft
END CAP COVER
TAPE
WITH
BACKING
GAP
(Place toward inside -
next to chimney.)
1. Remove backing from tape.
2. Clean end cap covers (inside) with Rubbing Alcohol or Isopropyl
Alcohol.
3. Press end cap covers over brackets.
4. Check the operation of the downdraft.
INSTALLATION