Installation guide

27. Aligning the ice-water dispenser
(for freezer unit with ice-water dispenser only)
In the case of appliances with a high-grace steel door,
there is a special covering frame.
The ice-water dispenser can be aligned inside the cutout of
the furniture door. This allows the dispenser to be aligned
parallel to tne furniture door in order to obtain an optimum
overall appearance.
Remove the pitcher holder (1.-3.).
Remove the covers from the water collecting tray (4.).
We suggest to attach the frame before adjusting tne
dispenser unit!
38
For S144 9 mm thick furniture doors:
m= = Slide cover frame onto the ice-water dispenser and
press in until the frame is flush with the coor surface.
For 11/5"/88 mm thick furniture doors:
m Press extension frame onto the cover frame.
m= = Slide cover frame onto the ice-water dispenser and
press in until the frame is flush with the coor surface.
Loosen screws on the 4 clamps (1.).
Insert flat screwdriver into one of the 4 slots and push
the blocks sideways until the ice-water dispenser nas
the same distance from the furniture door (2.).
m = Retighten the screws on the clamps (3.).
m insert covers.
m= Re-insert the pitcher holder.