Installation Instructions

English 5

Electrical Installation

Steam oven models are designed to be connected to either

a 208 V or 240 V AC, 60 Hz. 3-wire single-phase power

supply.

The electrical supply should be a 3-wire single–phase AC.

Install a suitable conduit box (not furnished).

IMPORTANT:

Local codes may vary; installation, electrical connections

and grounding must comply with all applicable local codes.

Electrical Connection

To facilitate serviceability, and to ensure the safety of the

installation the flex conduit must not be shortened and

should be routed to allow for temporary removal of the

oven.

1. Pull wires through knockout hole.

2. Snap the strain relief into place.

3. Connect the red oven wire to the red electrical supply

wire (hot wire).

4. Connect the black oven wire to the black electrical

supply wire (hot wire).

5. Connect the yellow/green ground oven wire to the bare

or green ground electrical supply wire.

WARNING:

IMPROPER GROUNDING CAN RESULT IN A

RISK OF ELECTRIC SHOCK.

Consult a qualified electrician if the grounding

instructions are not completely understood, or

if doubt exists as to whether the appliance is

properly grounded. If the power cord is too

short, have a qualified electrician install an

outlet near the appliance.

DO NOT USE AN

EXTENSION CORD.

1 — House power supply

2 — Black wires

3 — U.L.-listed conduit connector

4 — Pigtail

5 — Bare or green wire

6 — Red wires

7 — Junction box