Specification Sheet

Page 5 of 6
2 / 19
PRG364WLH
36-INCH GAS PRO HARMONY
®
RANGE WITH GRILL
PROFESSIONAL SERIES, STANDARD-DEPTH, PORCELAIN COOKTOP SURFACE
NOTE: A 36-inch
minimum clearance is
required between the top
of the cooking surface
and the bottom of an
unprotected cabinet. A
30-inch clearance can be
used when the bottom
of the wood or metal
cabinet is protected by
not less than
1
/
4
inch of a
ame retardant material
covered with not less
than No. 28 MSG sheet
steel, 0.015 inch (0.4 mm)
thick stainless steel, 0.024
inch (0.6 mm) aluminum,
or 0.020 inch (0.5 mm)
thick copper.
36-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH “LOW BACK”
Combustible
Materials
28" (711 mm)
27¼" (692 mm)
36" (914 mm) min.
to combustible
materials
24" (610 mm)
max. recess depth
Combustible
Back Wall
35
7
/8 " (911 mm) Min.
36 ¾" (933 mm) Max.
22 5/8" (575 mm)
44
7
/8 " (1140 mm)
Total Clearance
Installation Clearances with Low Backguard
9" (229 mm)
7" (178 mm)
Low Back
24
5
/8 " (625 mm)
24¾" (629 mm)
As defined in the “National Fuel Gas Code” (ANSI Z223.1, Current Edition).
Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 6" (152 mm)
must be approved by the local codes and/or by the local authority having jurisdiction.