Installation Guide

Page. 11
Side clearances
• The model shown is with the included island trim. A
low backguard option is available (purchased
separately).
• For an island trim install, counter surface should have
a cantilever edge meeting the back section of the
island trim.
• If an inner wall is used under the cantilever counter
top there should be a 1/8'' (3 mm) gap from the rear
of the range.
• There is a 48-3/4'' (1,238 mm) total clearance.
• Shaded area behind range indicates minimum
clearance to combustible surfaces. Combustible
materials cannot be located within this area with the
island trim.
• There is a 25-1/8'' (638 mm) maximum recess depth.
inches (mm)
28" (711)
27¼" (692)
30" (762) –
36" (914)
25⅛" (638)
35⅞" (911) –
36¾" (933)
26⅞" (683)
48¾" (1238)
6" (152) 6" (152) 6" (152)