Installation instructions

19
Installer checklist and service
Installer checklist
Final check
To clean and protect exterior surfaces
• The stainless steel surfaces may be cleaned by wiping
with a damp soapy cloth, rinsing with clear water and
drying with a soft cloth to avoid water marks. Any mild
glass cleaner will remove fingerprints and smears.
• To polish and protect stainless steel, apply a stainless
steel conditioner with a soft cloth. The Thermador
Stainless Steel Conditioner is available for purchase in
the online eShop (http://store.thermador.com/us/).
Order part number 00576697.
• DO NOT allow deposits to remain for long periods of
time.
• DO NOT use ordinary steel wool or steel brushes.
Small bits of steel may adhere to the surface causing
rust.
• DO NOT allow salt solutions, disinfectants, bleaches
or cleaning compounds to remain in contact with
stainless steel for extended periods. Many of these
compounds contain chemicals which could prove
harmful. Rinse with water after exposure and wipe dry
with a clean cloth.
Before calling service
Troubleshooting
See the Use and Care Guide for troubleshooting
information. Refer to the Limited Product Warranty in the
Use and Care Guide. Please be prepared with the
information printed on your product data rating label
when calling.
To reach a service representative, see the contact
information at the back of the manual. Before calling,
please note the complete model and serial number
printed on your product data rating label.
Product data rating label
The data rating label shows the model and serial number.
It is located under the filter. The data rating plate shows
the model and serial number. Refer to the data label on
the appliance when requesting service.
The data rating label is located on the frame behind the
filter. Remove the filter to view it.
Specified clearances maintained to cabinet surfaces.
Appliance is level.
All packaging material removed.
Proper ground connection.
Owner is aware of location of the main circuit
breaker.
Write the model number and serial number found
on the Product Data Rating Label in the Use and
Care Guide
. Leave the Use and Care Guide and the
Installation Instructions with the owner of the
appliance.
Leave the Home Connect™ instruction leaflet with
the owner of the appliance. In order to utilize the
full feature potential of the appliance, the owner
should download the Home Connect™ app on their
smart device and pair the appliance to the home's
Wi-Fi device.