User manual

English 10
TIME COOKING
Your MicroDrawer™ can be programmed for 99 minutes
99 seconds (99.99). Always enter the seconds after the
minutes, even if they are both zeros.
•Supposeyouwanttocookfor5minutesat100%.
1 Enter cooking time 5 0 0.
5.00 TOUCH START
OR TOUCH
POWER
LEVEL
2 To cook at 100% power (High), touch START (+1 min)
pad.
TO SET POWER LEVEL
There are eleven preset power levels.
Using lower power levels increases the cooking time,
which is recommended for foods such as cheese, milk
and long slow cooking of meats. Consult a microwave
cookbook or recipes for specific recommendations.
•Supposeyouwanttodefrostfor5minutesat30%.
1 Enter defrost time 5 0 0.
5.00
2 Touch POWER LEVEL pad 8 times.
3 Touch START (+1 min) pad.
TOUCH POWER LEVEL
PAD NUMBER OF TIMES
FOR DESIRED POWER
APPROXIMATE
PERCENTAGE
OF POWER
COMMON WORDS
FOR POWER
LEVELS
POWER LEVEL x 1 100% High
POWER LEVEL x 2 90%
POWER LEVEL x 3 80%
POWER LEVEL x 4 70% Medium High
POWER LEVEL x 5 60%
POWER LEVEL x 6 50% Medium
POWER LEVEL x 7 40%
POWER LEVEL x 8 30% Med Low/Defrost
POWER LEVEL x 9 20%
POWER LEVEL x 10 10% Low
POWER LEVEL x 11 0%
SENSOR SETTINGS
Thermador's Sensor is a semi-conductor device that detects
the vapor (moisture and humidity) emitted from the food as
it heats. The sensor adjusts the cooking times and power
levels for various foods and quantities.
USING SENSOR SETTINGS:
1 After the MicroDrawer™ is plugged in, wait 2 minutes
before using any sensor setting.
2 Be sure the exterior of the cooking container and the
interior of the MicroDrawer™ are dry. Wipe off any
moisture with a dry cloth or paper towel.
3 The sensor works with foods at normal storage tempera-
ture. For example, popcorn would be at room tempera-
ture.
4 Any sensor selection can be programmed with More or
Less Time Adjustment. See page 15.
5 More or less food than the quantity listed in the charts
should be cooked following the guidelines in any micro-
wave cookbook.
6 During the first part of sensor use, the food name will
appear on the display. Do not open the MicroDrawer™
or touch STOP/CLEAR during this part of the cycle. The
measurement of vapor will be interrupted. If this occurs,
an error message will appear. To continue cooking, touch
the STOP/CLEAR pad and cook manually.
When the sensor detects the vapor emitted from the
food, the remainder of cooking/reheating time will appear.
The MicroDrawer™ may be opened when the remaining
time appears on the display. At this time, you may stir or
season food, as desired.
7 Except for Popcorn, if the sensor does not detect vapor
properly when cooking other foods,
ERROR
will be
displayed, and the microwave will turn off.
8 Check food temperature after cooking. If additional time
is needed, continue to cook manually.
9 Each food has a cooking hint. Touch the SETTINGS pad
when the HELP indicator is lighted in the display.
Microwave cooking