Design Guide

CHIMNEY WALL HOODS
PLANNING INFORMATION
VENTILATION – CHIMNEY WALL HOODS | PLANNING INFORMATION
1.800.735.4328 | THERMADOR.COM
259
MODEL OPTIONS
Thermador Chimney Wall Hoods feature sleek styling and numerous
convenience functions. Chimney Wall Hoods are available in 36-inch,
42-inch and 48-inch widths and are adjustable to suit a range of
ceiling heights. All stainless steel or stainless steel with glass designs
are available. Be sure to reference the correct model information in
this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Chimney Wall Hood is properly installed and
grounded by a qualied technician. Installation, electrical connections
and grounding must comply with all applicable local codes.
If possible, site the earthed socket directly behind the chimney
paneling. The grounded socket should be connected via its own
circuit. If the grounded socket is no longer accessible following
installation of the hood, ensure that there is a permanently installed
disconnector.
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features, product
dimensions, cutouts and installation specications. Before installing
a Thermador Chimney Wall Hood, be sure to verify the cutout
dimensions and electrical connections. Also, always consult with the
installation manual packed with the product for complete details
before installing.
INSTALLATION OPTIONS
Thermador Chimney Wall Hoods may be installed above a Thermador
Range or Cooktop to create a convenient cooking center. Refer to the
ventilation selection guide for compatibility.
Hood installation height above a range or cooktop can vary. To
obtain the necessary installation height above a Thermador Range or
Cooktop, consult the appliance’s installation manual. An accessory
Hood Extension can be used to ll the space between the hood and
ceiling.
Thermador Wall Hoods can be mounted on a wall or suspended from
a cabinet. The cabinet must be structurally joined to the wall studs to
support the weight of this hood.
MODEL REQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
HPCN36NS 15 A
HPCN48NS 15 A
HPCB36NS 15 A
HPCB48NS 15 A
HMCN36FS 15 A
HMCN42FS 15 A
HMCB36FS 15 A
HMCB42FS 15 A
HDDW36FS 15 A