Installation Guide

Installation Instructions English | 13 |
Installation Instructions
Installation
Determine installation height
18
3
/
8
" (467)
8
1
/
4
"
(209)
30" (762) min over
a electric cooktop
30" (762) min over
a gas cooktop

An optional chimney extension kit to reach 9’-12’ (274 to
366 mm) may be purchased. Add or subtract chimney ex-
tensions as appropriate to accommodate ceiling height and
recommended hood height.
For gas cooktop & range installations: Mount the hood
so the bottom is at least 30” (76.2 cm) above the cooking
surface.
For electric/induction cooktop & range installations:
Mount the hood so the bottom is at least 30” (76.2 cm)
above the cooking surface.
NOTICE: The hood could incur some damage from heat
if a THERMADOR MASTERPIECE
®
series cooktop is opera-
ted with multiple burners at high settings under a hood that
is installed at minimum clearances.
Ceiling support structures
 This vent hood is heavy. Adequate structure and
support must be provided in all types of installations.
 At the hood location, install 2”x 4” cross framing
between ceiling joists as shown (2”x 4” are required to
support the weight of the hood).
 Arrange cross framing in the ceiling to suit the existing
structure.
 Your ceiling joists will be like one of the following:
Example A
NOTE: To p view ceiling joists
parallel to front of hood
10
1
⁄
16
” (25.5 cm)
install cross-
framing
symmetrically
over duct/cooktop
Centerline
16”
(40.6 cm)
joist spacing
7
1
⁄
16
”
(17.9cm)
Ø 8
1
⁄
4
” (21
cm) duct
2 x 4 cross
framing
Align duct to
center of cooktop
Hood front
Cooktop
outline
Example B
2 x 4 cross
framing
Align duct to
center of cooktop
Hood front
Cooktop
outline
NOTE: Top view ceiling joists
par
allel to front of hood
10
1
⁄
16
” (25.5 cm)
install cross-
framing
symmetrically
over duct/cooktop
Centerline
Ø 8
1
⁄
4
” (21
cm) duct
7
1
⁄
16
”
(17.9cm)
16”
(40.6 cm)
joist spacing
Example C
NOTE: Top view ceiling joists
par
allel to front of hood
Align duct to
center of cooktop
Hood front
Cooktop
outline
2 x 4 cross
framing
Ø 8
1
⁄4” (21
cm) duct
7
1
⁄
16
”
(17.9cm)
16”
(40.6 cm)
joist spacing
10
1
⁄
16
” (25.5 cm)
install cross-framing
symmetrically over
duct/cooktop
Centerline