Installation Guide

6
PRODUCT FEATURES
PIEZO IGNITION SYSTEM
This heater is equipped with a piezo ignition system.
LOCAL CODES
The installation must conform with local codes or, in the absence of local codes, with
the Standard for the Storage and Handling of Liquefied Petroleum Gases, ANSI/NFPA
58 and the Natural Gas and Propane Installation Code, CSA B149.1;
Every part of the heater shall be secure against displacement and shall be constructed
to maintain a fixed relationship between essential parts under normal and reasonable
conditions of handling and usage. Parts not permanently secured shall be placed so
they cannot be incorrectly assembled and cannot be improperly located or misaligned in
removing or replacing during cleaning or other servicing.
INSTALLATION
Before beginning assembly or operation of the product, make sure all parts are present.
Compare parts with package contents list and diagram above. If any part is missing or
damaged, do not attempt to assemble, install or operate the product. Contact customer
service for replacement parts.
Figure 1 – Portable infrared heater
UNPACKING
1. Remove heater from carton.
2. Remove all protective packaging applied to heater for shipping
3. Check heater for any shipping damage. If heater is damaged, promptly inform dealer
where you bought heater.