Installation Guide

14
12
-Heater produces unwanted
odors.
-- Heater is burning vapors from
paint, hair spray, glues, etc. See
IMPORTANT statement.
-- Gas leak. See Warning
statement.
-- Low fuel supply.
--- Ventilate room. Stop using
odor causing products while
heater is running.
--- Locate and correct all leaks
(see Checking Gas Connections).
--- Refill supply tank (Propane / LP
models).
13
-Heater shuts off in use
-- Not enough fresh air is
available.
-- Low line pressure.
-- Burner is partially clogged.
-- Thermocouple has cooled
--- Open window and/or door for
ventilation.
--- Contact local gas supplier.
--- Clean burner (see Care and
Maintenance).
--- Check gas pressure using the
pressure check valve on fuel
control.
14
-Gas odor during
combustion
-- Foreign matter between control
valve and burner.
-- Gas leak. See Warning
Statement.
--- Take apart gas tubing and
remove foreign matter.
--- Locate and correct all leaks
(see “Checking Gas
Connections”).
15
-Moisture/condensation
noticed on windows.
--Not enough
combustion/ventilation air.
--- Refer to "Warning Statement”