- Therna-Stor Production Santa-Fe Rx Free-Standing Dehumidification Installer's & Owner's Manual

Please read these instructions before modifying the Santa Fe Rx to
use the Laminated Top
1. Tools required. A medium size phillips screwdriver.
2. Remove the posts using the phillips screwdriver.
3. Remove the release paper from the ½” diameter by ¼” high
bumper pad and attach it over the locating hole as indicated
4. Attach the ¾” diameter by 1” high rubber bumpers to the outer
holes as indicated using the phillips screwdriver and the screws
provided.
5. Place the laminated top so the holes in the bottom of the
laminated top rests over the ¾” diameter by 1” high rubber
bumpers.
SANTA FE Rx LAMINATE TOP KIT
11
Santa Fe Rx Installer’s & Owner’s Manual
TS-241A-0600
Locating
Hole
Posts
Outer Holes
½" diameter x ¼"
high bumper
¾" diameter x 1"
high bumper