User Manual

Charging
• To charge the RecoveryTherm™ Hot & Cold Vibration Knee, remove
the battery from the control panel and connect it to the included
USB-C adapter.
• The RecoveryTherm™ Hot & Cold Vibration Knee is USB-C enabled.
• The battery level is displayed in the LED indicator on the battery
pack, next to the USB-C connector:
• Orange: low charge, blue: mid charge, green: fully charged.
• When charging, the LED will flash to indicate it is properly
connected and will turn solid green when complete.
Note: If using an alternative adapter, ensure that it is from a certied manufacturer and has not
suered any structural damage. Do not try to use the device while charging.