Installation Instructions

• Press and hold the button, then turn on the power switch to enter the
programming mode;
• After turning on the power switch, press and hold the button within 5 seconds
until the white lights flash on both sides, the WiFi name and password will be
restored to the default setting (Default password: 12345678);
• When the battery is low, the middle white light flashes;
• The charging indicator is next to the USB port (Type-C). Charging: Yellow | Fully
Charged: Green
Advanced Operation
Multiple-line Printing
In the Crop mode, you can add multiple crop boxes for multiple-line print. (Each box for
one line printing.)
When you are done with the pattern editing and cropping, press the button for the first
line printing. Move the printer to the next line and press the button again for second-
line printing. Follow the same manner to finish the rest lines.
Multiple-line Aligning
When you are done with the first line cropping, you can use the ‘Duplicate downward’
option to duplicate the first box, making sure the multiple-line printing is aligned.
Ultra-wide Pattern Printing
For ultra-wide pattern printing, errors may happen and the conversion process is longer
than the regular pattern printing. You can edit the very first crop box on the left and use
the ‘Duplicate right’ option to duplicate the first box.
Software Offline Operation
1. Go to the app setting page (check the sidebar on the home page).
2. Download the https certificate and install it.
3. Click the https link at the bottom of the app setting page.
4. Use browser option (‘Share’ function): Save page to desktop/home page.