Installation Instructions

3. Place the printer on the surface of the object to be printed.
4. Click the button, the green indicator light is on, and it’s ready to print.
5. Slide the printer to the direction you want to complete the print operation. The green
light goes off when it’s finished.
Notes:
• If the nozzle is dirty, please push out the brush in the base to clean the nozzle;
• If the nozzle is particularly dry, please pour a little water on the table, remove the
cartridge, and soak the nozzle in water for about 1 minute.
App Operation
1. Click ‘New’ to create a new file.
2. Click ‘Add image’ or ‘Add text’ to add content.
3. Click on the image or text to move, rotate and zoom. (Click the selected text again to re-
edit the content.)
4. After the material is added, click ‘Print Preview’ to enter the Crop mode.
5. Click the default crop box shown in the edit area, adjust the crop box to fit the desired
pattern area.
6. Click ‘Print’ to send the pattern to the printer.
Button Operation and Status Indication
• 5 seconds after power-on, it enters the ready state, followed by one beep, and
the white lights in the middle and both sides are on;
• In the ready state, click the button to enter the print state. The white lights on
both sides turn to green. Sliding the printer to complete the printing (The
continuous prompt tone will be sounded if the sliding is too fast). It will
automatically return to the ready state when the printing is completed;
• In the ready state, press and hold the button to enter the cleaning state, the
white lights on both sides turn to green. Keep the printer still, wait for a while and
it will automatically return to the ready state;
• In the print state, click the button to return to the ready state. If it is in the middle
of multiple-line printing, the next line will be printed when you re-press the
button again (return to first line if press and hold the button instead);