User`s manual

52
Configuration with syslog client and target to store remotely:
See the following table for a detailed description of each item:
Time
Item
Description
Syslog Daemon
Enable/Disable syslog daemon.
Syslog service
If Server has been selected then associated syslog folder will be
used to store all system logs from other NAS devices which has
assigned this system for syslog server as well as syslog of this
server unit. It can be seen from associated syslog folder with files
“error”, “Information” and “warning”.
If client has been selected then “Local” or “Remotely” can be
choose.
Target
Choose Local, all system logs will be stored in an associated
syslog folder filled in from next filed. And the syslog folder will
have file “messages” to store all system logs. If Remotely has
been selected, a syslog server is needed and an IP address is
required.
Syslog folder
Select from a drop down share list, all of the system logs will be
stored on it. This syslog folder is applied to “syslog server” or
“syslog client” with “local” selected.
Log Level
The user can choose from 3 different levels. “All”,
“Warning/Error” or “Error”.
Remote IP Address
Input the syslog server IP address if choose to store syslog info
remotely.
System Monitor
The system monitor is capable to monitor system status including CPU/memory
utilization, fan/temperature status, network throughput and on-line user list in
various protocols.
To monitor system status, simply click on “System Monitor” from the tree menu
and the screen will appear as below.