User`s manual

74
RAID Level
You can set the storage volume as JBOD, RAID 0, RAID 1, RAID 5, RAID 6,
RAID 10, RAID 50 or RAID 60 (depending on model).
Level
Model
JBOD RAID 0 RAID 1 RAID 5 RAID 6 RAID 10 RAID 50 RAID 60
N12000 series        
N16000 series        
N8900 series        
N6850       
N8850        
N10850        
N7700PRO V2       
N8800PRO V2        
N5550      
N4510U      
N7510       
RAID configuration is usually required only when you first set up the device. A brief
description of each RAID setting follows:
RAID Levels
Level Description
JBOD The storage volume is a single HDD with no RAID support. JBOD
requires a minimum of 1 disk.
RAID 0 Provides data striping but no redundancy. Improves performance
NOTE
Building a RAID volume may be time consuming, depending on the size of
hard drives and RAID mode. In general, if the RAID volume building process
is up to “RAID Building”, then the data volume is accessible.
WARNING
Creating RAID destroys all data in the current RAID volume. The data will be
unrecoverable.