User`s manual

54
Notification Configuration
Item Description
Beep Notification Enable or disable the system buzzer that beeps when a problem
occurs.
Email Notification Enable or disable email notifications of system problems.
Authentication Type Select the SMTP Server account authentication type.
SMTP Server Specifies the hostname/IP address of the SMTP server.
Port Specifies the port to send outgoing notification emails.
SMTP Account ID Set the SMTP Server Email account ID.
Account Password Enter a new password.
Log Level Select the log level to send the e-mail out.
Sender’s E-mail
Address
Set senders email address to send email notifications.
Receiver’s E-mail
Address (1,2,3,4)
Add one or more recipient’s email addresses to receive email
notifications.
Firmware Upgrade
From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
1. Use the Browse button to find the firmware file.
2. Press Apply.
3. The buzzer will beep and the Busy LED will blink until the upgrade is
complete.
NOTE
Consult with your mail server administrator for email server
information.
NOTE
• The buzzer only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.